AIRCAT® "Xtreme Duty" 3/4" Aluminum Impact Wrench
Model #1680
3 of 3 would recommend this to a friend
Extreme-Duty 3/4" Industrial Grade Aluminum Impact Wrench
Recommended Use: Bus, Large Truck, Tractor, mining, industrial bolt assembly
High Performance motor maximizes Torque output
Patented Ergonomically Designed Handle
Patented Quiet Tuned Exhaust
Durable Hard Hitting Twin Hammer Mechanism
The TWIN HAMMER Mechanism consists of 2 hammers in a closed cage which rotates around the anvil. This design allows the hammer to hit at the same time on both sides of the anvil. A twin hammer design is very durable and particularly suitable for long operating cycles. A further advantage is that the design consists of few individual parts and this makes it very easy to service. The twin hammer is lubricated by grease. Lubrication can be easily done from outside via greasing fitting without opening the housing. The TWIN-Hammer design is best used for industrial, all-around automotive applications, tire service and assembly.
Recommended Use: Bus, Large Truck, Tractor, mining, industrial bolt assembly
High Performance motor maximizes Torque output
Patented Ergonomically Designed Handle
Patented Quiet Tuned Exhaust
Durable Hard Hitting Twin Hammer Mechanism
The TWIN HAMMER Mechanism consists of 2 hammers in a closed cage which rotates around the anvil. This design allows the hammer to hit at the same time on both sides of the anvil. A twin hammer design is very durable and particularly suitable for long operating cycles. A further advantage is that the design consists of few individual parts and this makes it very easy to service. The twin hammer is lubricated by grease. Lubrication can be easily done from outside via greasing fitting without opening the housing. The TWIN-Hammer design is best used for industrial, all-around automotive applications, tire service and assembly.
Loosening Torque: 1,500 (ft-lbs)
Working Torque: 200-1200 (ft-lbs)
Blows Per Minute: 950 (BPM - Under Load)
Free Speed: 4,500 (RPM)
Weight: 12.58lbs (5.72 kg)
Overall Length: 8.93 in (227mm)
Avg.Air Consumption: 7.8 (CFM)
Sound Level: 86 (dBA)
Air Inlet: 3/8" NPT
Air Flow Pressure: 90 - 120 (psi)
CE Certified
1-Year Parts & Labor Warranty
Review 5
By JimH on 02-09-2012
This tools has some Balls!! Not for the weak wrist-ed! I'm impressed with the power - takes off anything in our Heavy Equipment shop....compact and powerful
Review 4
By WD on 02-17-2013
this is a bad*$$ impact gun. the strongest 3/4 drive i have ever used for sure, it has never let me down working on heavy equiment and diesel engines. turns anything you throw at it.
Review 3
By Howard Smith on 05-03-2013
I just bought one these wrenches to replace a Bluepoint 3/4 impact and before the Bluepoint I owned an IR261. First of all, I put 3/4 drive impacts through alot of abuse, I am a Caterpillar Technician that works on Mining Equipment from 994 Loaders, 793 Haul Trucks and etc, with big bolts to turn. My Bluepoint crapped out on me in the middle of rebuilding the center hitch on a 793D Haul Truck, and the center hitch bolts have a 1-7/8 head. They torque to 400 ft lbs with an additional torque turn of 60 degrees which means there is about 1200 ft lbs total torque on each of the twelve bolts. I used the 1680 to torque turn the bolts and it done the job without a hitch, not to mention that the vibration and the noise was way less than the Bluepoint or IR. This thing is like a 1" gun in a 3/4" package. It is heavier than the composite models, but much stronger. I am sold!! As long as you oil the gun like your supposed to oil all air tools it should last as long as any IR. I have used IR for years, and the AirCat is the only gun other than IR with equal power with less noise and vibration. I would recommend that any Tech in any market give this one a try.
Review 2
By Greg on 05-03-2013
Working on big coal hauling trucks you have to have an impact that will torque the bolts very tight and this imp[act has the most torque in its class. It was recommended by a friend and seems to do a good job. I would recommend it if you have some serious work to do and need to get it done fast.
Review 1
By Robert berthold on 10-01-2012
I use to bleed. Ingersall rand. Use to!! This gun kicked the crap out of anything on the market. This gun has been used and abused. And put up wet. Still runs. After 6months. I broke a hammer. Expected doing 500 to 1000 bolts a day. And they begged for me to send it in under warranty. Great price. Excellent gun. If u don't try this gun. Ur a moron and I still recommend ingersall to my competition.
This item has no schematics uploaded. Please contact us for detailed schematics.
Email a Friend:
Error
Your Name:
Your Email:
Your Friend's Name:
Your Friend's Email:
Write a Review:
Error
Your Name:
Your Email: (Not published online)
How would you rate this item?
Would you recommend this item to a friend?
Your Review:
