Impact Wrenches

AIRCAT 1680-6

3/4" x 6" Extended "Heavy Duty" Impact Wrench

Share

Features

  • Durable hard hitting twin hammer mechanism
  • 1,400 ft-lb Loosening torque
  • Best suited for bus, large truck, tractor, large agricultural service vehicles, mining, construction and industrial bolt assembly
  • High performance motor maximizes torque output
  • Patented ergonomically designed handle
  • 6" Extended anvil

Specifications

  • Square Drive (in.)
    3/4
  • Air Cons. (CFM)
    8
  • Bolt Capacity (in.)
    1
  • Air Inlet (in.) NPT/BSP
    3/8
  • Rec. Hose Size (in.)
    1/2
  • Weight (lbs.)
    14.9
  • Length (in.)
    14.9
  • Free Speed (RPM)
    4,500
  • Impacts Per Minute (IPM)
    950
  • Max. Torque (ft-lb)
    1200

5 Customer Reviews

Howard Smith - 10/23/2013

I just bought one these wrenches to replace a Bluepoint 3/4 impact and before the Bluepoint I owned an IR261. First of all, I put 3/4 drive impacts through alot of abuse, I am a Caterpillar Technician that works on Mining Equipment from 994 Loaders, 793 Haul Trucks and etc, with big bolts to turn. My Bluepoint crapped out on me in the middle of rebuilding the center hitch on a 793D Haul Truck, and the center hitch bolts have a 1-7/8 head. They torque to 400 ft lbs with an additional torque turn of 60 degrees which means there is about 1200 ft lbs total torque on each of the twelve bolts. I used the 1680 to torque turn the bolts and it done the job without a hitch, not to mention that the vibration and the noise was way less than the Bluepoint or IR. This thing is like a 1" gun in a 3/4" package. It is heavier than the composite models, but much stronger. I am sold!! As long as you oil the gun like your supposed to oil all air tools it should last as long as any IR. I have used IR for years, and the AirCat is the only gun other than IR with equal power with less noise and vibration. I would recommend that any Tech in any market give this one a try.

Grease Monkey - 9/9/2013

The impact wrench is quiet and powerful. My only complaint is; I had to use a large hose and connector. The m style didn't let enough air get to the wrench.

Greg - 9/9/2013

Working on big coal hauling trucks you have to have an impact that will torque the bolts very tight and this imp[act has the most torque in its class. It was recommended by a friend and seems to do a good job. I would recommend it if you have some serious work to do and need to get it done fast.

Howard Smith - 9/9/2013

I just bought one these wrenches to replace a Bluepoint 3/4 impact and before the Bluepoint I owned an IR261. First of all, I put 3/4 drive impacts through alot of abuse, I am a Caterpillar Technician that works on Mining Equipment from 994 Loaders, 793 Haul Trucks and etc, with big bolts to turn. My Bluepoint crapped out on me in the middle of rebuilding the center hitch on a 793D Haul Truck, and the center hitch bolts have a 1-7/8 head. They torque to 400 ft lbs with an additional torque turn of 60 degrees which means there is about 1200 ft lbs total torque on each of the twelve bolts. I used the 1680 to torque turn the bolts and it done the job without a hitch, not to mention that the vibration and the noise was way less than the Bluepoint or IR. This thing is like a 1" gun in a 3/4" package. It is heavier than the composite models, but much stronger. I am sold!! As long as you oil the gun like your supposed to oil all air tools it should last as long as any IR. I have used IR for years, and the AirCat is the only gun other than IR with equal power with less noise and vibration. I would recommend that any Tech in any market give this one a try.

Wayne Jackson - 9/9/2013

Heavy Duty gun that will Work well on our farm equipment . Excellent tool can'wait to use it on some manure covered nuts

Similar products

Sample Image

2 Year Warranty

We warrant that our tools shall be free from defects in original workmanship and material and that it will be inspected by us before shipment.



Sample Image

2016 Catalog

Download our 2016 Catalog to view our latest product offerings.